"Jake - Has Bad Luck So You Don't Have To" (murdersofa)
11/12/2015 at 22:33 • Filed to: miata
2
6|
"Jake - Has Bad Luck So You Don't Have To" (murdersofa)
11/12/2015 at 22:33 • Filed to: miata | 2
| 6 |
And this is what it looks like. eBay header, eBay resonator, and a repaired slightly rattly stock catback. Need to restore the tip, obviously, and the fitment is so slightly off but it’s nothing a pipe bender can’t fix when I get a new gasket to replace the garbage one that came with the manifold. In the mean time, I’m psyched because at this point the Miata is ready to truck on through the winter. All major mechanical issues have been taken care of, I no longer get dizzy from fumes leaking into the car, my tires won’t spontaneously explode, and the car no longer runs lean and idles rough, and I have a roll of clear plastic I’m about to go make a new rear window out of!
Jay Lauer
> Jake - Has Bad Luck So You Don't Have To
11/12/2015 at 22:51 |
|
That looks like poo.
Seat Safety Switch
> Jake - Has Bad Luck So You Don't Have To
11/12/2015 at 22:57 |
|
I don’t remember exactly how the Miata has it, but can’t you bend the hanger arm on the backbox until it moves the entire assembly over that last half an inch?
|
Jake - Has Bad Luck So You Don't Have To
> Jay Lauer
11/12/2015 at 23:32 |
|
Fartin’ down the road
|
Jake - Has Bad Luck So You Don't Have To
> Seat Safety Switch
11/12/2015 at 23:33 |
|
The hangers are already pulling it a fair bit to the left. I’d rather just bend the pipe and remove all of the mechanical stress on the system if possible.
Needmoargarage
> Jake - Has Bad Luck So You Don't Have To
11/13/2015 at 01:03 |
|
Which Ebay header and resonator did you buy? How was fitment?
I’m in the market for a crappy Miata exhaust as well.
|
Jake - Has Bad Luck So You Don't Have To
> Needmoargarage
11/13/2015 at 11:51 |
|
The cheapest I could find. I had to half-moon the outer bolt holes because fitment was garbage, but its alright other than that